Fortinet FortiLog-100 Manual de usuario descargar pdf (Pagina 89)

FortiLog CLI reference Connecting to the CLI

FortiLog Administration Guide 05-16000-0082-20050115 89

10 Type the password for this administrator and press Enter.

The following prompt appears:

Welcome!

You have connected to the FortiLog CLI, and you can enter CLI commands.

Setting administrative access for SSH or Telnet

To configure the FortiLog unit to accept SSH or Telnet connections, you must set

administrative access to SSH or Telnet for the FortiLog interface to which your

management computer connects. To use the web-based manager to configure

FortiLog interfaces for SSH or Telnet access, see “Admin” on page 46.

To use the CLI to configure SSH or Telnet access

1 Connect and log into the CLI using the FortiLog console port and your terminal

emulation software.

2 Use the following command to configure an interface to accept SSH connections:

set system interface port1 config allowaccess ssh

3 Use the following command to configure an interface to accept Telnet connections:

set system interface port1 config allowaccess telnet

Note: Remember to press Enter at the end of command. As well, remember to type end and

press Enter to commit the changes to the FortiLog configuration.

1 2 ... 84 85 86 87 88 89 90 91 92 93 94 ... 123 124

Sin comentarios

Fortinet FortiLog-100 Manual de usuario Pagina 89