Fortinet FortiLog-100 Manual de usuario descargar pdf (Pagina 88)

88 05-16000-0082-20050115 Fortinet Inc.

Connecting to the CLI FortiLog CLI reference

Connecting to the CLI

The FortiLog-800 model has serial port and you can use the null modem cable to connect it to

your management computer.

The FortiLog-100 and 400 models do not support serial cable connections. You can use a

erminal emulation software such as HyperTerminal for Windows to access the CLI.

• Connecting to the FortiLog-800 console

• Setting administrative access for SSH or Telnet

• Connecting to the FortiLog CLI using SSH

• Connecting to the FortiLog CLI using Telnet

Connecting to the FortiLog-800 console

You require:

• A computer with an available communications port,

• A null modem cable to connect the FortiLog console port and a communications

port on your computer,

• Terminal emulation software such as HyperTerminal for Windows.

To connect to the FortiLog-800 console

1 Connect the

FortiLog console port to the available communications port on your

computer.

2 Make sure the

FortiLog unit is powered on.

3 Start HyperTerminal, enter a name for the connection, and select OK.

4 Configure HyperTerminal to connect directly to the communications port on the

computer to which you have connected the

FortiLog console port.

5 Select OK.

6 Select the following port settings and select OK.

7 Press Enter to connect to the

FortiLog CLI.

8 A prompt appears:

FortiLog-800 login:

9 Type a valid administrator name and press Enter.

Note: The following procedure describes how to connect to the FortiLog CLI using

Windows HyperTerminal software. You can use any terminal emulation program.

Bits per second 9600

Data bits 8

Parity None

Stop bits 1

Flow control None

1 2 ... 83 84 85 86 87 88 89 90 91 92 93 ... 123 124

Sin comentarios

Fortinet FortiLog-100 Manual de usuario Pagina 88